jackharrismusic.com is a participant of Amazon Affiliate program, we may earn a small commission from qualifying purchases made through our recommended links. Learn more.

10 Best Cold Air Intake for Chevy Silverado 1500 in 2022

In this digital era, the opportunity to enhance the performance of the vehicle’s engine is a must! Chevy Silverado 1500 can perform in a much better way.

If you look for an upgrade in your Chevy Silverado 1500 engine performance, get the best cold air intake system, one of the easiest and most economical solutions.

The best cold air intake for Chevy Silverado 1500 offers more power to the vehicle and enhances the engine’s efficiency.

You can obtain various advantages such as fuel economy, power, and more oxygen from cold air intake for your Silverado’s engine, etc.

When it is about the cold air intake for Silverado, it depends on how you select a filter, lubricants, etc.

Furthermore, you should obtain an ultimate cold air intake kit to effortlessly make your vehicle’s engine work without any choking and dust.

The Silverado 1500 air intake systems blow extra cool air into your vehicle’s engine motor to get active ignition.

These kits also enable more oxygen into the engine and help make more horsepower and torque.

Likewise, you will also experience an extraordinary upsurge in fuel efficiency with these cold intake units. Also, it increases the durability of the engine of your vehicle.

This blog will briefly overview the ten best cold air intake for Chevy Silverado available in the market.

Further, this buying guide and FAQs section will help you make a worthy choice about your needs.


Table of The Best Cold Air Intake for Chevy Silverado 1500

01. K&N 63-3082
02. MOOSUN MS-99-06-BB
03. MOOSUN MS-06880
04. K&N 57-3023-1
06. Volant 15553 Pro
07. S&B Filters 75-5116
09. K&N 63-3079
10. K&N 63-3090


Top 10 Best Cold Air Intake for Chevy Silverado 1500 Reviews

01. 63-3082 Cold Air Intake Kit by K&N: Best High-Performing Kit



Product Features

  • Conically-shaped air filter
  • Aerodynamically crafted air tube
  • Filtration system with tiny cotton fibers
  • Dyno-tested with roto-molded design
  • Offers 50% better airflow
  • No cleaning for up to 100,000 miles

Product Specifications

  • Brand: K&N
  • Model: 63-3082
  • Weight: 13.11 pounds
  • Dimensions: 24.09 x 15.51 x 14.49 inches

Product Description and Performance

K&N’s 63-3082 cold air intake kit is roto-molded and delivers efficient performance while enhancing the engine’s efficiency. To facilitate this, it has been Dyno-tested.

Thus it delivers up to 50% superior airflow in comparison to the intake tube and air filter of the factory box. Besides, this product has been engineered to boost uphill performance along with acceleration while towing.

In addition, it improves the throttle response for flawless engine functioning. Such striking features make this one the best cold air intake kit for Chevy Silverado 1500.

“A good thing about this air intake tube is the top-notch protection that it offers for the engine. Likewise, it safeguards the vehicle’s engine against harmful pollutants and grime. As a result, it increases the longevity of the engine for a reliable application in continual use.”

Talking about the maintenance, the filter requires no cleaning till 100,000 miles. Moreover, it features a convenient bolt-on setup system.

Hence, it will take around an hour to install this air intake kit into the system of your vehicle. For this process, one will need the basic handheld tools only.

Last but not the least, the aerodynamically designed tube elevates the horsepower and torque for exceptional drivability.


  • Aids in towing performance
  • Escalates the horsepower and torque
  • Enviable engine sound
  • Unmatchable engine protection


  • No significant rise in the gas mileage


63-3082 cold air intake kit by K&N excels in terms of sturdiness and attractive aesthetics. Most importantly, the aerodynamic tube takes the horsepower and torque to a notch higher.

However, the conical air filter fits into the system perfectly for excellent airflow. Make sure to clean the filter after 100,000 miles for consistent performance.

02. MS-99-06-BB 4 Inch Cold Air Intake Black Tube with Heat Shield by MOOSUN: Best Heat Protection



Product Features

  • Filter, couplers, and tube seals of silicon
  • Arrives with a heat shield
  • Made using alloy steel
  • Maximizes filtration efficiency by 95%
  • 5-10% elevation in horsepower
  • Boosts torque by 6-10%

Product Specifications

  • Brand: MOOSUN
  • Model: MS-99-06-BB
  • Weight: 7.89 pounds
  • Dimensions: 14.96 x 11.02 x 5.91 inches

Product Description and Performance

MOOSUN’s MS-99-06-BB cold air intake kit arrives with a heat shield made of premium-quality steel. Undeniably, it offers unmatchable protection against heat and extreme weather conditions as well.

Coming onto the build-up, it comprises alloy steel that boosts the product’s durability to a noticeable extent. On top of that, it has a concealing of carbon-black powder that enriches the aesthetics significantly.

One can consider this kit a great replacement for the deterring factory intake housing and air filter of the vehicle.

“A remarkable thing to consider about this product is the practical engineering that lessens the intake restrictions. Eventually, it aids in straightening and smoothing the airflow. Therefore, the user gets to experience flawless and high-flow output by using this cold air intake kit.”

Apart from it, this intake system increases the filtration efficiency to a maximum of 95%. More to say, it stimulates the horsepower and torque by 5-10% and 6-10%, respectively, for a power-packed performance.

Furthermore, this cold air intake kit produces a thrilling intake sound as well. Commonly, this product includes a couple of silicon and hose clamps to ease the application.

There is no need for any extra parts for the installation after getting this resourceful kit.


  • Multi-filtration system
  • Straightforward fixing process
  • Offers precision fitting
  • Reusable and washable filter


  • The quality and fitting of the clamp is a bit dissatisfactory


If you are looking for a cold air intake kit that contributes to fuel economy, MOOSUN’s MS-99-06-BB is a great pick. Aside from enriching the overall functioning and efficiency of the engine, it resists moisture too.

An important thing to remember is that you must clean the filter every 5,000 miles for quality and performance stability.

03. MS-06880 4 Inch Cold Air Intake System with Heat Shield by MOOSUN: Best for Extreme Conditions



Product Features

  • Dry, reusable, and washable filter
  • Supplementary components of silicon
  • Generates an exciting growl on acceleration
  • No cleaning up to 100,000 miles
  • Increase in horsepower and torque
  • Made with alloy steel

Product Specifications

  • Brand: MOOSUN
  • Model: MS-06880
  • Weight: 7.92 pounds
  • Dimensions: 16.6 x 13 x 7.6 inches

Product Description and Performance

MOOSUN’s MS-06880 cold air intake system is crafted to work well in extreme conditions. For this, it has an effective heat shielding made using steel that aids in reducing the heat damage.

Similarly, the build-up contains alloy steel for excellent durability. Besides, this kit swaps the factory intake housing and air filter of the vehicle for delivering output with the optimal flow.

However, this kit includes all the vital components that you will require during the installation process.

“In particular, this cold air intake kit provides a noticeable rise of up to 5-10% in horsepower. In addition to this, it increases the torque up to 6-10% for power-driven performance. Another good thing to consider about this product is that it straightens out the airflow as well.”

An appealing feature of this cold air intake system is its ability to eliminate the intake restriction for a seamlessly smooth application.

While moving onto the maintenance part, this product can easily last around 100,000 without cleaning. After that, one has to clean the air filter to keep it in good condition.

The kit includes two useful components: a hose clamp and a couple of silicon to aid the user while fixing the intake pipe and filter.


  • Comprehensive filtration system
  • Improvement in fuel economy
  • Prevents the moisture accumulation
  • Boosts the acceleration power


  • As a user, it is a tedious task to tighten the clamps


MOOSUN’s MS-06880 cold air intake kit offers a combination of performance and sturdiness. Most importantly, the heat shield and superior filtration system safeguard the engine against inevitable deteriorations.

Aside from it, this kit increases the airflow considerably. Keep a check on the filer, especially if you drive off-road or in extreme conditions frequently.

04. 57-3023-1 Cold Air Intake Kit by K&N: Best in Boosting Horsepower



Product Features

  • Conically-shaped HDPE tube
  • Reinforced nylon and silicone components
  • Provides a horsepower of 15.17 hp at 5,018 rpm
  • Lasts without cleaning till 100,000 miles
  • Dyno-tested with 50% more airflow
  • Oiled filter system with cotton fibers

Product Specifications

  • Brand: K&N
  • Model: 57-3023-1
  • Weight: 11.66 pounds
  • Dimensions: 18 x 18 x 12 inches

Product Description and Performance

If you want to drive with optimum horsepower, this cold air intake kit by K&N will suffice the requirement. Likewise, it has been Dyno-tested for quality assurance.

Thus, it delivers 50% extra airflow than the restrictive factory compartment’s intake tube and air filter. Apart from it, this cold air intake system enriches the engine’s sound to fulfill the expectations of all outdoor adventure enthusiasts.

To put it simply, this product develops wide-ranging engine capabilities for power output.

“While towing, this product works on boosting the acceleration along with the uphill performance. For this, it remarkably increases the throttle response for a smooth driving experience. Significantly, the aerodynamic tube design leads to a surge in torque and horsepower too.”

There is a heat shield that reduces the temperature of the air that gets inside the engine. Moreover, the tube is made from non-metallic and interlaced HDPE which results in lessening the turbulence.

Another appealing aspect is the oiled filter system with tiny cotton fibers that protect the engine from harmful contaminants. Lastly, the filter remains in perfect working condition till 100,000 without cleaning.


  • Swift installation procedure
  • Inclusion of supplementary accessories
  • Top-notch engine protection
  • Bolt-on simple fixing system


  • Installation instructions are vague


Features-wise, K&N’s 57-3023-1 cold air intake kit is nothing less than a fruitful investment. A cheery on the top is the bolt-on installation that only takes around an hour using basic handheld tools.

One must seek professional assistance if the installation instructions are not serving the purpose.

05. MP-AIK-002 4 Inch Cold Air Intake Filters System with Heat Shield by MILLION PARTS: Best Appealing Build-up



Product Features

  • Vehicle-specific fitting
  • Build using alloy steel
  • Anodized pipes of aluminum
  • Blue-colored textured surface
  • Enhances acceleration and power
  • Wear-resistant application

Product Specifications

  • Model: MP-AIK-002
  • Weight: 6.98 inches
  • Dimensions: 19.29 x 7.87 x 13.98 inches

Product Description and Performance

MILLION PARTS’s MP-AIK-002 cold air intake filter system flaunts an attractive build-up. For this, it has an anodized blue-colored surface with a sleek and smooth finishing that adds to its aesthetics.

Overall, the construction comprises alloy steel for unmatchable sturdiness and steadfastness in long-term usage.

“A striking aspect about this product is its resistivity towards the certain deteriorations. Similarly, the pipes are made using supreme-quality aluminum to withstand wear. Eventually, it extends the life cycle of the cold air intake system.”

In particular, this product has been specifically designed to increase acceleration and deliver power-driven results.

In addition, it also safeguards the engine against harmful impurities and grime. There is no need to use complex, expensive tools for installing this cold air intake system.

Above all, the setup process is pretty much straightforward for the user’s convenience.


  • Attractive polished finishing
  • Less-complicated and quick installation
  • Boosts the engine efficiency
  • Enriches the drivability


  • There are slight blemishes on the chrome pipe


A cold air intake system by MILLION PARTS excels in terms of long-lastingness and impressive aesthetics. However, one must check and clean the filter as per the requirement.

Do not over-tighten the clamps while fixing the product inside the system of the vehicle.

06. 15553 Pro 5 Filter Enclosed Air Intake System by Volant: Best Comprehensive Application



Product Features

  • Vehicle-particular fitting
  • Bigger cool airbox
  • Made with cross link polyethylene
  • Subsides the air temperature
  • Increases the torque and horsepower
  • High-velocity filter adapter

Product Specifications

  • Brand: Volant
  • Model: 15553
  • Weight: 5 pounds
  • Dimensions: 20 x 16 x 12 inches

Product Description and Performance

Volant’s 15553 pro five filter air intake system has an enclosed design for delivering exceptional airflow. A closed air box of larger size plays an important role in significantly boosting the torque and horsepower.

Apart from it, this product increases the air volume as well for delivering power-loaded performance.

“Furthermore, this air intake system uses a venturi filter adapter of higher velocity. As a result, it offers a smooth and swift transition over the MAF sensor inside the intake tube for better airflow.”

Besides, the cool airbox works at optimal efficiency and contains a bigger opening to draw a greater volume of cold ambient air.

Along with that, it reduces the temperature of the air that enters the engine. Thus the cold air intake system performs flawlessly and reliably even in hot climates.

Emphasizing the construction, it contains cross-link polyethylene for more strength and sturdiness.


  • Remarkable engine protection
  • Hard-wearing application
  • Superior airflow and air volume
  • Excellent cooling efficiency


  • Sealing off the air intake is dissatisfactory


If you are a beginner, seek professional assistance while installing the Volant’s enclosed air intake system. Specialized filter design and a bigger cool box are the two key features of this product.

Moreover, the throttle response is also quite good. Yet this air intake system produces a thrilling sound only while driving on the highways in speed.

07. 75-5116 Cold Air Intake by S&B Filters: Best Air Flow



Product Features

  • Above 99% efficiency rating
  • 40% more airflow
  • ISO 5011 tested and certified
  • Long-lasting due to the use of silicone parts
  • Perfectly designed to negate check engine lights
  • Sturdy silicone air filter

Product Specifications

  • Brand: S&B Filters
  • Model: S&B
  • Weight: 17 pounds
  • Dimensions: 3.15 x 15.35 x 14.57 inches

Product Description and Performance

S&B 75-5116 is one of the best which has come out after intense research.

Hence, it would not be a bad idea to check this out if you are planning to get a cold air intake unit for your Chevy Silverado 1500. The product lasts long and is sturdy in its performance.

“Furthermore, this air intake kit comes with an enclosure box which helps keep other parts under the hood separate. The enclosure box excellently protects the filter from heat, dirt, and debris. Above all, the enclosure consists of a clear lid which helps you monitor if cleaning is required or not.”

Also, the air filter cannot be overlooked, which is made of superior 8-layered cotton media. Air filter cotton media is oiled and washable; above all, the 8 layer ensures excellent performance during the filtration of air.

Air filter is perfectly oiled using precisely programmed machines before delivery. The Air tube facilitates the unhindered cold airflow with utmost perfection.

As the complete system is precisely engineered to fit the stock calibration, you will not have to face a “check engine” light after installing the air intake unit.

Besides, the installation procedure of the air intake unit can be completed swiftly by using basic tools which you may have in your garage.


  • Improved engine performance
  • Negates check engine lights
  • Superior performance 8 layered cotton filter
  • Customized enclosure to keep unwanted engine heat out
  • Less restrictive airflow


  • Complex installation guide


The durability and performance of this cold air intake unit are proven. Hence, you can always opt for this air intake system if you are planning to change the existing one.

08. ER38003-1 4 Inch Cold Air Intake System with Heat Shield by BLACKHORSE RACING: Best Horsepower and Throttle Response



Product Features

  • Good performance air intake kit with heat shield
  • Better throttle response
  • Powerful horsepower output
  • 6-9% increased torque
  • Aluminum pipes to negate rust and corrosion
  • Swift installation process

Product Specifications

  • Brand: Blackhorse Racing
  • Model: ER38003-1
  • Weight: 9.18 pounds
  • Dimensions: 19.5 x 12 x 7.3 inches

Product Description and Performance

Blackhorse Racings ER38003-1 cold air intake unit helps you increase the engine horsepower by 9-10%.

Furthermore, it also increases the torque by 7-8%. Steel heat shield with a durable carbon-black powder coating makes the air intake unit durable and protects from dirt and debris.

“ER38003-1 cold air intake unit is easy to install with all the basic stuff you have in your garages such as pliers, screwdrivers, etc. The cold air intake unit facilitates engine to flow more cold air which in turn improves throttle response and horsepower output.”

With enormous micro cotton fibers, the filtration system becomes very effective. Debris and dirt stay away due to the presence of layered oiled cotton media.

Above all, the aluminum pipes help prevent corrosion and rust. These features altogether make the product perform very well.


  • Affordable performance upgrade
  • Value for money
  • Easy installation process
  • State-of-the-art filtration system
  • Durable
  • Increased torque and horsepower


  • No sensor ports
  • No MAF adapter hose


It is definitely worth a buy and gives your truck an excellent sound. Hence, if you want a unit that should enhance the horsepower and torque, go for it.

09. 63-3079 Cold Air Intake Kit by K&N: Best Acceleration and Uphill Performance



Product Features

  • Heat shield made of carbon fiber
  • Hassle-free installation
  • Improved engine sound and throttle response
  • Enhance horsepower of 31.7 @ 4300 RPM
  • Easy maintenance
  • Good protection and better towing
  • DYNO-tested

Product Specifications

  • Brand: K&N
  • Model: 63-3079
  • Weight: 8.77 pounds
  • Dimensions: 22.25 x 14.25 x 12.5 inches

Product Description and Performance

Since 1969, K&N was known to manufacture the best aftermarket cold air intake units.

One of the important areas on which they work is the heat shield that helps your vehicle’s engine to remain cool in the toughest conditions.

The washable air filters of K&N are one of a kind, which freshen up the airflow. Cabin air filters are such that they can be washed and recycled as many times as you want.

“63-3079 air intake unit from K&N has a state-of-the-art filtering system made of microscopic cotton fibers. The oiled cotton media helps protect your vehicle’s engine from dirt and debris.”

K&N has engineered to such precision that it enhances the horsepower and torque in comparison to the OEM one. Above all, this air intake unit is easy to install and saves time.

Furthermore, the installation process does not require any drilling or cutting.


  • The durable and long-lasting air intake unit
  • Increase horsepower and torque
  • Good uphill performance
  • Improved engine sound
  • Heatshield made of carbon fiber
  • Easy to install and maintain


  • Difficult to bend the seal


Though it is difficult to bend the seal around 90 degrees, you can do it with slight effort. K&N’s air intake unit will provide you with the desired performance with improved engine sound.

10. 63-3090 Cold Air Intake Kit by K&N: Best Engine Protection



Product Features

  • Crafted for improved engine sound and throttle response
  • Enhanced horsepower
  • Long-lasting up to 100,000 miles before service
  • Equivalent to OEM air intake system
  • Carbon fiber intake tubes which are lightweight
  • Swift installation procedure
  • Reusable and washable air filter

Product Specifications

  • Brand: K&N
  • Model: 63-3090
  • Weight: 10.34 pounds
  • Dimensions: 18.25 x 18.25 x 12.5 inches

Product Description and Performance

63-3090 air intake unit from K&N eliminates obstruction in your vehicle’s engine. If you look broadly, then this is one of the high-flow intake units available in the market.

K&N’s 63-3090 is designed to give you enhanced horsepower. K&N’s was in the market since 1992 for air intake kits. The air filter system offered by K&N’s model offers high protection for your vehicle’s engine from dirt and debris.

Furthermore, this product performs more than the OEM air intake unit. The swift installation of this cold air intake unit makes it considerable.

Longevity and world-class protection, along with easy maintenance, make it a good competitor.


  • Robust and durable
  • Enhanced engine sound and performance
  • Washable and reusable air filters
  • Superior manufacturing quality
  • Dyno tested
  • Better towing


  • Slightly low-quality mounting spare parts


If you are looking for an air intake unit that is easy to maintain and as well as durable, look no further as this is the one which you should go for.

Do not forget to clean the filter after 100,000 miles for longevity.

Buying Guide

There are various kinds of air filter systems available in the market. However, selecting the appropriate one for your vehicle is quite a challenging task altogether.

Apart from that, you have to consider the compatibility of your vehicle to make the filter system align with it properly.   It has been seen that most people, due to a lack of sound knowledge and proper understanding, end up buying an inferior quality product.

This buying guide will take a look at some of the resourceful aspects to consider while opting for the best cold air intake for Chevy Silverado 1500.


In many instances, it has been noticed cases, it has been seen that air intake units do not work optimally.

This occurs due to the inadequate flow of air into the engine, resulting in the deterrence of flammable oxygen getting into your Chevy Silverado 1500 engine.

Nowadays, there are diverse cold air intake kits available in the market to respond to such problems. The only void in modern air intake kits is that the openness of the design depreciates the filtration procedure.

Hence, while buying the unit, you must ensure that both filtration and a good airflow system are upheld constantly. This will help enhance the duration of your Chevy Silverado 1500 engine.


The compatibility of the air filter kit with other units of the vehicle is vital for it to work effectively. For the air filter to work properly, it should align with other parts of your vehicle.

If you are looking to go for the products online, then go through the label specifications thoroughly, as it will help you get the perfect air intake kit for your Chevy Silverado 1500.

If any concerns are popping up in your mind regarding the specifications of the air intake system, then go through the owner’s manual provided along with your vehicle.

Simultaneously, it will assist you in placing an order to procure a suitable fit air intake system online. As the system of the engine is too multifaceted and interrelated, a mismatch in the size of the air filter will obstruct the complete engine resulting in further damages.

Cold air intake kits are diverse for different models of vehicles. Hence, it is essential to pick a compatible one for your Chevy Silverado 1500 to avoid any hassle.


An effective air filter system becomes robust due to its multiple layers. Likewise, the kit with additional layers will result in good filtration, but at the same time, you have to ensure that their replacement does not cost too much.

Moreover, one should not compromise on the quality aspect over the cost as the perfect cold air intake will yield the optimum output in the longer run.

Right Choice of Filter

There are two kinds of filters obtainable in the market, dry and oil. Normally, people get confused while selecting between oil and dry filters.

However, it would be better to go through the vehicle’s air filter system to pick a suitable filter. Oil filters are not worthy for some vehicles with sensors as the oil outflow might damage them.

Hence, dry filters are used in most cases. Now, if we take the aspect of filter’s longevity, then oil ones are the ultimate choice. The oil filter can be recycled by cleaning them regularly.

Complete Kit with Required Parts

The air intake kits usually include all the indispensable parts, such as filters, pipes, and hoses. But it is always better to thoroughly check before placing an order online.

Since the kit bundled without the right parts will lead to unsuccessful fitting and harm to the Chevy Silverado 1500 engine.


The engine of Chevy Silverado 1500 is great and can travel through lands and everglades. But it would help if you did not let the water enter into the air intake system of your vehicle.

Hence, a water-resilient air filter system is recommended for such a powerful engine vehicle.

Installation Process

During the installation of the air intake system, you have to decide if you need to hire a professional mechanic to accomplish the task.

However, if you want to save your pennies, then do it on your own. This will not only cut down on costs but also save your precious time too. In this regard, you prefer buying those parts that are easy to install.

On a different note, other factors that you need to consider are cost, manufacturer, reviews of users while procuring a cold air intake.

Frequently Asked Questions

What is the importance of cold air intake?

The cool air intake system is a device to yield more airflow into the engine of your vehicle. This helps in enhancing the combustion inside the Silverado’s engine.

Not only does it increase the torque but also the power of the engine. Cold air intake is an assembly of various parts and can be prepared by using silicon, rubber, plastic, etc.

What is a TBI spacer?

TBI spacer is embedded between the intake tube and throttle body of the engine. The exclusive design of this product offers a better flow of air by passing through the intake tube and mixing with the fuel favorably.

How can the performance of the engine be increased by cold air intake?

There are two ways through which a cold air intake kit improves the performance of the engine. It enables a maximum volume of air to enter the engine.

Consequently, more oxygen is lifted into the engine. Correspondingly, the air sent to the engine should be cool. Thus, a cold air intake enables the engine to use maximum power by sending cool air to its maximum.

How often can a filter be washed or changed?

It entirely depends on the filter. You should check the user manual or packaging of the filter, which comes with an approximation of how long it can last before changing or washing.

Hence, in this regard, you need to check the filter regularly to understand if there is a need for a wash. However, you need to wash or change it if there is an accumulation of dust particles covering the filter.

Finally, the performance of the engine decreases.

How will you come to know that there is a need for a new air intake unit?

The strange sound coming out of your vehicle’s engine indicates that the time has come to change the air filter. Changing the filter is cost-effective to resolve the problem.

The second phase is to change the cold air intake unit completely. A disturbing situation arises when your vehicle struggles while accelerating by slowing down.

It is where the need for immediate replacement pops in. Hence, without delay further, you need to replace the system.

Why is cold air so important for the Chevy Silverado 1500 engine?

The cold air intake system is very beneficial for your Chevy Silverado 1500 engine as it not only helps ease the amount of impurity inside the engine but also enhances the performance of the engine.

This, in turn, increases the duration of your vehicle engine too.

Are tuners compulsory with a cold air intake system?

If you want to make any significant amendments to enhance the efficacy and performance of your Silverado air intake unit, then tuners can be considered using.

Is using a filter wrap necessary?

Using a filter wrap is not mandatory though it offers an additional layer of shield. Filter wrap grabs hefty impurities and keeps those away from the filter material.

However, the filter does not get dirty rapidly as significant pollutants cannot contact the filter material. Thus, before washing, it assists you in extending the filter usage.

How many kinds of air intake units are accessible in the market?

Generally, there are three kinds of air intake units accessible in the market.

  • True cold air intake enables the cool air to flow into the chamber of the engine, which allows more oxygen to enhance its performance to its optimum.
  • Short RAM unit assists in exchanging the OEM kit by replacing it with a new one swiftly. At the time of installation, it requires a small amount of drilling.
  • RAM air intake comes with long tubes, which allows an adequate volume of air to go through your vehicle’s engine to offer more power.

What are the guidelines to make the engine of Chevy Silverado cool?

Mentioned below are a few guidelines through which you can keep the engine of your vehicle cool. Some of them are:

  • Help to maintain the cooling of your Silverado’s engine, turn off the AC
  • Blow out the additional heat from the engine, turn on the heater
  • Recuperate the engine, park your vehicle, and keep it in neutral
  • Open the cover of the engine during overheating

Can I do the installation of cold air intake?

Yes, the installation of cold air intake is manageable as far as you have all the essential tools and adequate space to do it. Besides, the installation can be done within an hour.

Nowadays, you can also access video tutorials online to get a clear view of the basic installation process.

On the other hand, if you are looking for a professional to install it for you, you have to spend a hefty amount of money to accomplish the task.

You are saving not only your money but also time by doing it on your own.


By now, you must have now got a fair idea of the cold air intake systems and their features along with the functionalities.

For buying the best cold air intake, read the list of products shared in this blog, and pick the most appropriate one as per your need.

Always make it a point to go with an authentic brand without compromising on the quality aspect over the cost.

The suitable cold air intake for Chevy Silverado enhances the horsepower, makes the most of the acceleration and torque of your vehicle’s engine.

With the help of this review and buying guide, it will be convenient for you to select the best product of your choice. It is crucial to locate the best cold air intake to keep your vehicle up and running effortlessly.

The only thing you need to consider before buying the intake unit is its quality, features, and longevity.

Leave a Comment