Subaru Tire Pressure Sensor Problem

In recent years, Subaru has been plagued by a tire pressure sensor problem that has caused many drivers to experience flat tires and other issues. This problem is caused by a faulty sensor that is located in the tire pressure monitoring system (TPMS). When this sensor fails, it can cause the TPMS to give false readings, which can lead to drivers overinflating or underinflating their tires. This can cause serious damage to the tires and even cause them to fail.

So, shy does the Subaru tire pressure sensor occurs? what are the solutions? Read further to know!

Contents

How Does a Tire Pressure Sensor Work?

A tire pressure sensor is a small device that is located in the tire pressure monitoring system (TPMS). This sensor is responsible for sending a signal to the TPMS that indicates the pressure in the tires. When this sensor fails, it can cause the TPMS to give false readings, which can lead to drivers overinflating or underinflating their tires.

What Are the Symptoms of a Tire Pressure Sensor Problem?

bad tire sensor symptoms

It is important to have a closer look at tires and not depend just on the sensor. It is because the tire sensor does not give accurate results and sometimes it stops working. 

There are several symptoms that can be associated with a tire pressure sensor problem. These symptoms include:

Flat Tires 

One of the most common symptoms of a tire pressure sensor problem is flat tires. This can be caused by the TPMS giving false readings that lead to the driver overinflating or underinflating their tires.

Damaged Tires

Another symptom of a tire pressure sensor problem is damaged tires. This can be caused by the TPMS giving false readings that lead to the driver overinflating or underinflating their tires.

Tire Failure

Tire failure can also be caused by a tire pressure sensor problem. This is usually the result of the TPMS giving false readings that lead to the driver overinflating or underinflating their tires.

So, these three were the very common symptoms of tire sensor failure but what is the reason behind this problem? Let’s know! 

What Causes a Tire Pressure Sensor Problem?

The installation fault and bad quality sensor both are the key reason for poor sensor output. However, there are several things that can cause a tire pressure sensor problem. These are: 

Faulty Sensor

One of the most common causes of a tire pressure sensor problem is a faulty sensor. This can be caused by a manufacturing defect or by damage to the sensor.

Damaged TPMSs

Another common cause of a tire pressure sensor problem is damaged TPMS. This can be caused by physical damage to the TPMS or by software problems.

Incorrect Installation

One other common cause of a tire pressure sensor problem is incorrect installation. This can be caused by the sensor being installed in the wrong location or by the wrong type of sensor being used.

So, it is important to ensure that you have purchased a quality sensor and installed it in the right order. 

What Are the Solutions to a Tire Pressure Sensor Problem?

tire pressure sensor fault reset

To solve tire pressure sensor problems you have a few options like replacing sensors or, TPMS or updating software. Let’s see in detail, 

Replacing the Sensor

One solution to a tire pressure sensor problem is to replace the sensor. This can be done by a mechanic or by the driver themselves.

Repairing the TPMS

Another solution to a tire pressure sensor problem is to repair the TPMS. This can be done by a mechanic or by the driver themselves.

Updating the Software

One other solution to a tire pressure sensor problem is to update the software. This can be done by a mechanic or by the driver themselves.

Depending on your specific tire sensor problem, you can apply these solutions for having a smooth working pressure sensor.

READ NEXT: 4.3 Vortec Fuel Pressure Regulator Symptoms

Final Words

Subaru tire pressure sensor problem is caused by a faulty sensor that is located in the tire pressure monitoring system (TPMS). When this sensor fails, it can cause the TPMS to give false readings, which can lead to drivers overinflating or underinflating their tires. This can cause serious damage to the tires and even cause them to fail. 

There are several solutions to this problem, including replacing the sensor, repairing the TPMS, and updating the software. So, if you notice that your Subaru tire sensor problem is occurring. Try to fix it as soon as you can.

Leave a Comment